Description
Diameter 1/8″ (3.2mm), Cutting Length 3/8″, Overall Length 1-3/4″: 12E-81103211 (CMT Product #: 811.032.11)
Diameter 3/16″ (4.75mm), Cutting Length 1/2″, Overall Length 2″: 12E-81104711 (CMT Product #: 811.047.11)
Diameter 5mm, Cutting Length 15/32″, Overall Length 2″: 12E-81105011 (CMT Product #: 811.050.11)
Diameter 15/64″ (6mm), Cutting Length 5/8″, Overall Length 2″: 12E-81106011 (CMT Product #: 811.060.11)
Diameter 1/4″ (6.35mm), Cutting Length 3/4″, Overall Length 2″: 12E-81106411 (CMT Product #: 811.064.11)
Diameter 1/4″ (6.35mm), Cutting Length 3/4″, Overall Length 2-1/4″ (For Incra Jig): 12E-81106511 (CMT Product #: 811.065.11)
Diameter 3/8″ (9.5mm), Cutting Length 1″, Overall Length 2-1/2″: 12E-81109611 (CMT Product #: 811.096.11)
Diameter 31/64 (12.3mm), Cutting Length 1″, Overall Length 2-1/4″: 12E-81112311 (CMT Product #: 811.123.11)
Diameter 1/2″ (12.7mm), Cutting Length 3/4″, Overall Length 2-1/4″: 12E-81112711 (CMT Product #: 811.127.11)
Diameter 5/8″ (15.87mm), Cutting Length 3/4″, Overall Length 2-5/8″: 12E-81115811 (CMT Product #: 811.158.11)
Diameter 23/32″ (18.2mm), Cutting Length 1″, Overall Length 2-1/4″: 12E-81118211 (CMT Product #: 811.182.11)
Diameter 3/4″ (19.05mm), Cutting Length 3/4″, Overall Length 2-1/4″: 12E-81119111 (CMT Product #: 811.191.11)
Diameter 1″ (25.4mm), Cutting Length 3/4″, Overall Length 2″: 12E-81125411 (CMT Product #: 811.254.11)
- Exceptional chip ejection to allow cleaner and more constant cutting.
- The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch, and other residues.
- Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance, and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.
- Made in Italy
- Sold by: Each
- Never use damaged or worn bits.
- Always work at the recommended proper feed rate without forcing the bit.
- Pay particular attention when making the initial cut with a small diameter bit.
- For best results when working with small diameter bits, make the cut in more than one pass.