Description
Rotary Cut Birch, 48″ x 96″: 04F-10048
Rotary Cut Birch, 48″ x 120″: 04F-10040
Flat Cut Maple, 48″ x 96″: 04F-11148
Flat Cut Maple, 48″ x 120″: 04F-11140
Quart Cut Maple, 48″ x 96″: 04F-11348
Quart Cut Maple, 48″ x 120″: 04F-11340
Flat Cut Red Oak, 48″ x 96″: 04F-13148
Flat Cut Red Oak, 48″ x 120″: 04F-13140
Flat Cut White Oak, 48″ x 96″: 04F-16148
Flat Cut White Oak, 48″ x 120″: 04F-16140
Rift Cut White Oak, 48″ x 96″: 04F-16248
Rift Cut White Oak, 48″ x 120″: 04F-16240
Flat Cut Cherry, 48″ x 96″: 04F-17148
Flat Cut Cherry, 48″ x 120″: 04F-17140
Vertical Grain Fir, 48″ x 96″: 04F-18148
Vertical Grain Fir, 48″ x 120″: 04F-18140
Flat Cut Red Alder, 48″ x 96″: 04F-21148
Flat Cut Red Alder, 48″ x 120″: 04F-21140
- Made by applying a backer that varies in thickness. The veneer is flexed to make the wood supple, then sanded and cut to size as per your request.
- Approx thickness: .22 to .30 thousandths of an inch.
- These products are really flexible which allows for a lot of different uses whether on flat lamination or a small curved surface.
- From the Manufacturer: Although this product is really flexible, it is important to use high-grade glue. We recommend PVA glue. It’s also important to apply strong pressure, around 100 PSI. We suggest that you use a hydraulic press but if this is not possible, the pressure should be made with a piece of wood 18 inches long by 3 inches wide and cut at a right angle. (The use of a J Rolls is prohibited).
- inquire re: 5 mil and 20 mil paperback
- other veneers and sizes available upon request
- for more information on our veneers please visit www.placagesmultiflex.com