Description
Clear Gloss: 02K-3030943
White: 02K-30901
Grey: 02K-30902
Dark Grey: 02K-30903
Tan: 02K-30904
Brown: 02K-30913
Black: 02K-30914
Mahogany: 02K-30918
Pink: 02K-30919
Maple: 02K-30931
Teak: 02K-30933
Grey Walnut: 02K-30934
Birch: 02K-30935
Primary Yellow: 02K-30936
Primary Red: 02K-30937
Olive:02K-30939
Orange: 02K-30940
Almond:02K-30941
Butcher:02K-30942
Spectrum Green:02K-30945
Spectrum Blue:02K-30946
Antique White: 02K-31572
From Kampel:
- SeamFil is a single part, solvent based repair system for high pressure laminated surfaces. It will cure in approximately one hour, but we recommend 24 hours for total cure. SF99 Solvent is the ONLY recommended solvent for use with SeamFil.
- One (one ounce tube of SeamFil) will approximately fill an 8 foot Seam of Counter with an 1/8″ bead. If the seam is wider than 1/16″ (but should never be larger than 1/8″) a second application will probably be necessary. It can be used to fill an area that is no longer than 1/4″ in diameter.
- SeamFil will not freeze because of the solvent.
- The shelf-life of SeamFil is 1 year if opened and correctly capped, two years, if unopened
- SeamFil can withstand heat up to 120 °
- SeamFil’s VOC is 48 (529 g voc / L) wet measurement and SF99 Solvent is 100% VOC and will attack non-laminate surfaces like, finished wood, PVC, etc.
- SeamFil dries to a matt finish. To obtain a Glossy Finish, 943 Clear Gloss should be added.
- To increase the cure time of SeamFil, 944 SeamFil Retarder can be added to the mix.
- SeamFil is a one-part system that is a solid color. It does not have any variation of color within the tube for patterns or woodgrain effects.
- SeamFil is NOT recommended for use on Solid Surface materials.
